Pavlovsky Parket



About the engineering parquet board

The engineering parquet board from the manufacturer Pavlovsky Parket differs from other wooden floor coverings by a combination of high performance characteristics with an affordable price. The board is made in Russia from local raw materials on high-quality equipment and on advanced, proven technologies. Engineering parquet board has high strength, excellent geometry of construction, stability in operation. And, thanks to the fact that Pavlovskiy Parquet manufactures an engineering parquet board for a full production cycle, it keeps the price affordable for the buyer.

Pavlovskiy Parket manufactures and implements an engineering parquet board made from the wood of prime grade, natures and rustic. The board is made both without a finish coating, and in different colors with the use of parquet oil.

The engineering parquet board "Pavlovsky Parket" is a two-layer construction. The top layer of the board is a solid sawed oak lamella with a thickness of 4 or 6 mm, which is glued together with the bottom layer of birch plywood. Along the perimeter, the engineering parquet board is equipped with a spike-groove connection and has a facet on 4 sides. On the lower layer of the engineering parquet board there are compensating longitudinal cuts.


Construction - Upper, working layer - laminated wood from sawn veneer.

The bottom layer is birch plywood. Technological compensating transverse cuts of the lower layer.

Thickness (H) - 12 mm (oak / maple - lamella (h1) - 3 mm + plywood - 9 mm) 
Thickness (H) - 15 mm (oak / maple - lamella (h1) - 4 mm + plywood - 11 mm) 
Thickness (H) - 17 mm (oak / maple - lamella (h1) - 6 mm + plywood - 11 mm)
Width (S) - 120, 140, 150, 180 mm
Length (L) - 400 - 1200 mm

Processing - Groove with 4 sides, bevel with 4 sides, surface grinding.
Humidity - 8 ± 2%
Strength of construction - The ultimate strength for tearing off lamellas is not less than 0.6 MPa


Grade Prime.

The engineering board of the highest category, in which small areas with variations of color tone are possible, and also knots with a diameter of up to 6 mm are allowed, not more than one per linear meter.

Grade Natur.

Classical grade of the engineering board without selection by cutting. The board has a natural pattern of wood, there are tolerable differences in tone. On the engineering board are possible "live" not fallen out knots, in which the diameter is not more than 20 mm.

Grade Rustic.

in this grade of the engineering board dark and light knots are allowed, dropped and putty with a diameter of not more than 60 mm, veins, tilt of fibers. Small cracks shrinkage, which are sealed with a putty under the color of wood and do not spoil the appearance of the board - all these are characteristic features of the rustic variety. Also for this grade, wood changes in color, sapwood in a width of up to 20 mm.

Breeds of wood

Options for finishing with colored oil